Home > Products > Telecom & Broadcasting > Fiber Optic Equipment > C-Band Single Channel Fiber Line Amplifier (HSA4200)
C-Band Single Channel Fiber Line Amplifier (HSA4200)
Optical C-Band EDFA Line amplifierHSA4200Product descriptionAITC HSA4200 series is a C-Band Single Channel Fiber Line Amplifier designed specifically for single wavelength optic transmission system. It is installed in the middle of the transmission line, replacing the traditional relay station, to c......
Send Inquiry
Product Description
Optical C-Band EDFA Line amplifier
HSA4200
Product description
AITC HSA4200 series is a C-Band Single Channel Fiber Line Amplifier designed specifically for single wavelength optic transmission system. It is installed in the middle of the transmission line, replacing the traditional relay station, to compensate the optical power loss in the line and extend the signal transmission distance.
Product features
1. Covered full C-Band.
2. High gain, low noise.
3. Telecommunication-grade security and reliability, and network management function.
4. The LCD, LED at the front panel offers the work index and warning alarm of all equipment.
5. Standard RS232 communication interface.
6.10/100M Ethernet interface supports SNMP and WEB remote network management.
7.1+1 powers supply back up, hot-plug function available.
8. Low power consumption.
9. Excellent P/P ratio in area.
Main application
1. Long distance trunk network
2. MAN or access network
3. All kinds of SDH/PDH transmission system
4. FTTx PON
HSA4200
Product description
AITC HSA4200 series is a C-Band Single Channel Fiber Line Amplifier designed specifically for single wavelength optic transmission system. It is installed in the middle of the transmission line, replacing the traditional relay station, to compensate the optical power loss in the line and extend the signal transmission distance.
Product features
1. Covered full C-Band.
2. High gain, low noise.
3. Telecommunication-grade security and reliability, and network management function.
4. The LCD, LED at the front panel offers the work index and warning alarm of all equipment.
5. Standard RS232 communication interface.
6.10/100M Ethernet interface supports SNMP and WEB remote network management.
7.1+1 powers supply back up, hot-plug function available.
8. Low power consumption.
9. Excellent P/P ratio in area.
Main application
1. Long distance trunk network
2. MAN or access network
3. All kinds of SDH/PDH transmission system
4. FTTx PON
| Performance | Index | Supplement | ||||
| Min | Typ | Max | ||||
| Optic feature | Working wavelength range | (nm) | 1528 | 1564 | ITU 88CH | |
| Input optical power(Pi) | (dBm) | -25 | -10 | |||
| Output optical power(Po) | (dBm) | 13 | 23 | |||
| Noise figure | (dB) | 5.0 | Max output,max gain | |||
| Polarization dependence loss (PDL) | (dB) | 0.3 | ||||
| Polarization dependence gain (PDG) | (dB) | 0.3 | ||||
| Polarization mode dispersion (PMD) | (ps) | 0.3 | ||||
| Input/output optical isolation | (dB) | 30 | ||||
| Pump power leakage | (dBm) | -30 | ||||
| Echo loss | (dB) | 45 | UPC | |||
| 55 | APC | |||||
| Optical supervisory channel wavelength ranges | (nm) | 1500 | 1510 | 1520 | ||
| General feature | SNMP network management interface | RJ45 | ||||
| Communication interface | RS232 | |||||
| Power supply | (V) | 90 | 265 | 220VAC | ||
| 30 | 72 | -48VDC | ||||
| Power consumption | (W) | 30 | ||||
| Working temp. | (°C) | -5 | +70 | |||
| Storage temp. | (°C) | -40 | +85 | |||
| Working relative humidity | (%) | +5 | +95 | |||
| Size (W)×(D)×(H) | (mm) | 483×205×44 | ||||
Related Category
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
