Home > Products > Telecom & Broadcasting > Communication Module > (SPA4300-GM01) Single-Channel Gain Block Small Form Factor Pre-Amplifier EDFA Module
(SPA4300-GM01) Single-Channel Gain Block Small Form Factor Pre-Amplifier EDFA Module
SPA4300-GM01Single-Channel Gain Block Small form factor Pre-Amplifier EDFA moduleProduct desctiptionSPA4300-GM01 is a single channel Gain Block Pre-Amplifier EDFA module , adopts subminiature 40×70×12mm compact package, combined with artistic package and best optic performance, c......
Send Inquiry
Product Description
SPA4300-GM01
Single-Channel Gain Block Small form factor Pre-Amplifier EDFA module
Product desctiption
Product feature
1.Gain block
2.Wide operating temperature range
3.15dB, 20dB, 25dB, 30dB, Gain optional
4.Small form factor package (40×70×12mm)
5.Low power consumption
6.Low cost
Main application
1.Metropolitan and access networks
2. CATV
3.Single-channel or DWDM sub-systems
4.Optical Add/Drop and Cross-Connects
5.Optical receiver power amplification
6.Power equalization and flexible pre-emphasis
Technical Index
Single-Channel Gain Block Small form factor Pre-Amplifier EDFA module
Product desctiption
SPA4300-GM01 is a single channel Gain Block Pre-Amplifier EDFA module , adopts subminiature 40×70×12mm compact package, combined with artistic package and best optic performance, creating the best flexible and variable low-cost amplifier in the market. This module is suitable for multiple network application, especially the application that requires 40GB/S transmission speed.
SPA4300-GM01single channel Gain Block Pre-Amplifier EDFA module, uses high performance non-cooling pump laser, adopts the standard version of single channel and narrow bandwidth. A standard 6-PIN(Optional 14-Pin) electric connector allows the simple electric connection.
SPA4300-GM01 single channel Gain Block Pre-Amplifier EDFA module, main installed before the receiver to improve receiver sensitivity and extend signal transmission distance
Product feature
1.Gain block
2.Wide operating temperature range
3.15dB, 20dB, 25dB, 30dB, Gain optional
4.Small form factor package (40×70×12mm)
5.Low power consumption
6.Low cost
Main application
1.Metropolitan and access networks
2. CATV
3.Single-channel or DWDM sub-systems
4.Optical Add/Drop and Cross-Connects
5.Optical receiver power amplification
6.Power equalization and flexible pre-emphasis
Technical Index
Performance | Min. | Typ. | Max. | |||
Optical properties | Operating wavelength range | (nm) | 1528 | 1564 | ||
| Input optical power (pin) | (dBm) | -30 | -10 | |||
| Gain @ Pin=-30dBm | SPA4315-GM01 | (dB) | 15 | |||
SPA4320-GM01 | 20 | |||||
SPA4325-GM01 | 25 | |||||
SPA4330-GM01 | 30 | |||||
| Noise figure | (dB) | 4.0 | 4.5 | |||
| Polarization dependent gain (PDG) | (dB) | 0.3 | ||||
| Polarization mode dispersion (PMD) | (dB) | 0.3 | ||||
| Polarization dependent loss (PDL) | (ps) | 0.3 | ||||
| Pump power leakage | (dB) | -30 | ||||
| Output & input isolation | (dB) | 30 | ||||
| Return loss | (dB) | 45 | UPC | |||
55 | APC | |||||
Electrical feature | Pump laser threshold current (70ºC) | (mA) | 50 | 70 | ||
Pump laser operating current (BOL) | (mA) | 600 | ||||
Pump laser operating voltage | (V) | 1.75 | 2.2* | |||
Output monitor PD responsivity (70ºC) | (μA/mW) | 1.0 | 25 | |||
Output monitor PD reverse voltage | (V) | 5 | 20 | |||
Output monitor PD forward current | (mA) | 10 | ||||
Dark current (-5V, 25ºC) | (nA) | 5 | ||||
| General feature | Fiber type | SMF-28, 900μm loose tube | ||||
| Connector type | LC, SC, FC | |||||
| Connector polish | UPC,APC | |||||
| Operating temp. | (ºC) | -5 | 70 | |||
| Storage temp. | (ºC) | -40 | +85 | |||
| Operating humidity | (%RH) | +5 | +95 | |||
| Size (W)×(L×(H) | ( mm ) | 40×70×12 | ||||
Related Category
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
